Chimney Repair in Centennial, CO | Chimney Sweep Centennial

Chimney Repair in Centennial - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Centennial Homeowners

Chimney damage rarely announces itself. It shows up as a rust streak on the firebox, a crumbling mortar joint you notice from the driveway, or a draft that wasn’t there last winter. Our technicians have up to 13 years of experience diagnosing exactly these problems in Centennial, and we work to a single rule: no repair gets recommended until a camera inspection shows us what the flue actually needs. You see the evidence before you approve anything.

Call (833) 842-2139

We handle the whole system, from the crown and flashing down to the liner, which means one company stays accountable from diagnosis through the finished repair. Our technicians are insured and bonded, and we work exclusively with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – the lines that hold up in Colorado’s freeze-thaw cycles rather than the cheapest stock available. If a door or damper fails on a Saturday, call and we’ll book the work for Sunday.

Call (833) 842-2139 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Chimney Cap Installation

Chimney Cap Installation is the fitting of a screened cover over the flue opening to keep rain, snow, birds, and debris out while letting smoke escape. You need one if the chimney has no cap, if the existing cap is a rusted scrap of mesh, or if you’ve heard animals in the flue. Our technicians size the cap to the actual flue dimension rather than forcing a universal fit, and we draw from Famco and Olympia Chimney components because the connection points are what fail first. Typical chimney cap installation in Centennial runs $150 to $450 depending on cap style, flue count, and access. The written estimate sets the final price.

Single-Flue and Multi-Flue Caps

A single-flue chimney takes a straightforward top-mount cap. Multi-flue stacks need a custom or multi-port cap sized to the full crown footprint, which takes more measuring but protects every flue at once.

Animal Guards and Spark Screens

The mesh is the working part of any cap. Stainless screens resist corrosion far better than galvanized in wet snow, and a proper guard stops birds and squirrels from nesting in an unused flue.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement is the removal of a damaged cap and the fitting of a new one, and it’s the repair we schedule most often after wind events along the Front Range. If your cap is dented, the mesh is torn, or the whole unit has shifted off center, it’s no longer doing its job – water gets in, and water is what drives most of the liner and masonry damage we repair. We pull the old cap, check the flue tile and crown beneath it for damage the failing cap may have caused, then install a new cap from Famco or Copperfield. Chimney cap replacement in Centennial typically runs $175 to $500. The written estimate sets the final price.

Why Caps Fail Before They Look Bad

Fasteners rust through from the inside, so a cap can look solid and still be loose. We check the mounting screws and the band tension, not just the visible surface.

Matching the Cap to the Flue

An oversized cap lets water blow in under the edge; an undersized one blocks draft. We measure the flue tile opening and match the cap to it rather than grabbing the nearest size.

Chimney Liner Installation

Chimney Liner Installation is the fitting of a continuous flue lining inside the chimney to contain heat and combustion gases, and it becomes necessary when the original clay tiles are cracked, spalled, or missing entirely. An unlined or damaged flue lets heat reach nearby framing and lets carbon monoxide migrate into the home, so this is not a repair to defer. We install DuraFlex flexible stainless liners for wood and gas appliances, and we apply HeatShield resurfacing where the existing flue is sound enough to restore rather than replace. Both are specialized systems most general chimney services don’t carry. Chimney liner installation in Centennial typically runs $2,200 to $5,500 depending on height, flue size, and appliance type. The written estimate sets the final price.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 842-2139

Flexible Stainless Liners

DuraFlex liners flex around offsets in older masonry chimneys that rigid pipe can’t follow. They’re rated for the appliance they serve, so we match the liner to the fuel type rather than using one spec for everything.

HeatShield Resurfacing

HeatShield restores a deteriorated flue from the inside, sealing cracks and rebuilding a smooth surface without demolition. It’s the right call when the flue structure is intact but the inner face has broken down.

Chimney Flashing Repair

Chimney Flashing Repair is the correction of the metal that seals the joint where the chimney passes through the roof, and it’s the first place to look when you see water staining on the ceiling near the chimney. Flashing fails when the sealant dries out, when nails back out, or when the metal itself corrodes through. On steep or high roofs, this means working at height on a surface that can be slick with meltwater – a job for a trained professional, not a weekend ladder project. We reset or replace the flashing, integrate it with the roofing material, and seal the joints properly. Chimney flashing repair in Centennial typically runs $300 to $850 depending on roof pitch and flashing type. The written estimate sets the final price.

Leaks That Aren’t the Flashing

Not every ceiling stain traces to flashing. Cracked crowns and failed mortar joints mimic flashing leaks, so we test before we replace metal that may still be sound.

Roof Pitch and Access

Steep pitches and tall stacks take more time and more safety setup. That’s a cost driver, and we tell you up front when it applies rather than surprising you on the invoice.

Chimney Crown Repair

Chimney Crown Repair is the repair or rebuild of the concrete cap at the very top of the chimney, the sloped surface that sheds water away from the flue. A cracked crown lets water soak into the masonry below, and through repeated freeze-thaw cycles that water splits brick faces and mortar joints from the inside out. This is the single most common cause of masonry failure we see in Centennial, where meltwater refreezes overnight through much of the winter. We repair hairline cracks with a flexible sealant or rebuild the crown entirely where the damage is structural, finishing with a proper slope and overhang. Chimney crown repair in Centennial typically runs $300 to $900 depending on crown size and whether it’s a repair or a full rebuild. The written estimate sets the final price.

Cracked Versus Crumbling Crowns

Hairline cracks can often be sealed and monitored. A crown that’s crumbling, separating from the flue, or has lost its slope needs a rebuild to stop water intrusion.

The Right Slope and Overhang

A crown that’s flat or undercut traps water at the flue joint. Rebuilding with correct slope and a proper drip edge is what makes the repair last.

Chimney Repair Companies

Chimney Repair Companies vary widely in scope, and the difference matters most when a job crosses from cleaning into structural work. Some operations clean but won’t touch a liner; others subcontract the masonry. Chimney Sweep Centennial covers sweep, inspection, and repair under one provider, so the findings from the inspection stay with the company doing the work. We use Gelco sealants and HeatShield or DuraFlex liner systems because those are what the trade relies on for a repair that lasts. Typical chimney repair in Centennial ranges from $300 for a small crown or flashing fix up to $5,500 for full liner replacement and masonry rebuild. The written estimate sets the final price.

Want to talk it through?Free estimate, price agreed before work starts
Call (833) 842-2139

What to Ask Before You Book

Ask whether the inspection comes with photos you can keep, and whether the same company performs the repair. Vague answers on either point are worth noticing.

One Provider, One Point of Accountability

When the inspector and the repair crew are the same operation, nobody hands your chimney to a stranger. That’s the model we work to, and it’s why we sweep, inspect, and repair in-house.

Chimney Masonry Repair

Chimney Masonry Repair is the rebuilding of damaged brickwork and mortar joints, and in Centennial it’s most often needed where water has been getting in for several winters. Spalling brick faces, crumbling mortar, and a leaning stack all point to moisture damage that started higher up. We repoint joints with mortar matched to the existing brick, replace spalled units, and address the crown or flashing that let the water in so the new masonry isn’t fighting the same problem. Every masonry repair is diagnosed from a camera inspection first, so you’re not paying to rebuild brick when a simpler fix higher up would solve it. Chimney masonry repair in Centennial typically runs $500 to $3,000 depending on the extent of repointing and rebuild. The written estimate sets the final price.

Repointing and Spalled Brick

Repointing replaces failed mortar before the brick itself starts to crack. Replacing spalled brick faces restores the shell so it sheds water instead of absorbing it.

When Masonry Can Safely Wait

Not every crack is urgent. If the camera shows the damage is cosmetic and not letting water deeper, we say so and tell you what to watch.

Brands We Service

We service DuraFlex flexible liner systems and know exactly where they wear – at the appliance connection and where the liner flexes around offsets. We also work with HeatShield resurfacing on flues where the structure is sound but the inner face has broken down, a repair that saves the chimney from wholesale replacement. Gelco sealants and crown materials are part of how we close up the top of a system so water stops getting in after masonry work.

Famco and Copperfield components cover caps, dampers, and venting pieces that complete the assembly, and we know the failure points on each. Olympia Chimney parts round out the systems we handle. Whether you have DuraFlex, HeatShield, Famco, Copperfield, Gelco, or Olympia Chimney components – or any other make – we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 842-2139

Signs You Need a Pro Right Now

  • Water staining on the ceiling or firebox. Rust streaks or dark rings mean water is getting past the crown or flashing. Left alone, that moisture reaches framing and interior finishes.
  • Crumbling mortar or loose brick. Mortar that wipes away easily or brick faces flaking off signal moisture damage working outward. A loose stack is also a structural concern that shouldn’t wait.
  • White staining on the masonry. A chalky white residue on the exterior brick means water is moving through the masonry and leaving mineral deposits behind. It’s a sign the crown or flashing seal has failed.
  • Visible cracks in the flue or crown. Any crack in the flue tile is a pathway for heat and carbon monoxide. Have it inspected before the next fire.
  • Animals or debris in the flue. Nesting material and debris block draft and can ignite. A proper cap stops it, but the flue needs clearing first.

Our Process, Step by Step

  1. 1
    Book the visit. Call (833) 842-2139 and we’ll schedule a slot. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
  2. 2
    Sweep and inspect. We clean the flue, then run a camera up the full height of the chimney to see the liner, joints, and crown. This is a chimney inspection you can rely on because you get the photos.
  3. 3
    Review the findings with you. We show you the footage and photos and explain what’s actually wrong. No repair gets recommended that the evidence doesn’t support, and we say plainly when something can safely wait.
  4. 4
    Write the estimate. You get a flat price for the job before any work begins. The written estimate sets the final price, so there’s no drifting number.
  5. 5
    Complete the repair. We carry out the work with the matched materials – DuraFlex, HeatShield, Gelco, or the right Famco and Copperfield component – and finish with a check that the whole system works.

How Much Does Chimney Repair Cost in Centennial?

Chimney repair in Centennial typically runs $150 to $5,500, and the range is wide because the work is wide – a cap is a different job from a full liner rebuild. Broken down by the work we do most:

Repair Typical Range
Chimney cap installation or replacement $150 – $500
Flashing repair $300 – $850
Crown repair or rebuild $300 – $900
Masonry repointing and rebuild $500 – $3,000
Liner installation (DuraFlex or HeatShield) $2,200 – $5,500

What drives the number is height and access, roof pitch, appliance type, and how far the damage has spread before it’s caught. Catching a cracked crown early often means a seal rather than a rebuild, so the inspection pays for itself. To avoid overpaying, ask for the camera footage and the written estimate before work starts – a company that won’t show you the evidence is asking you to take a number on faith. Our free estimate includes the sweep, the inspection, the photos, and a flat price for the job. Nothing gets added later without your sign-off.

Call (833) 842-2139 for an exact quote – estimates are free.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 842-2139

Our Service Area Near Centennial

We work across Centennial and the surrounding south-metro area, including Cherry Creek, Dove Valley, Lone Tree, Stonegate, Parker, The Pinery, Roxborough Park, Castle Rock, and Highlands Ranch. Travel time varies with location, but scheduling is straightforward: call, and we’ll book a slot that fits. Homeowners in these communities get the same chimney repair process wherever they are, from camera inspection through finished work. If you’re outside this list, call and we’ll confirm whether we can reach you.

Serving Centennial, CO – Our Local Coverage Area

We serve Centennial and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Repair in Centennial

Schedule Your Chimney Repair Service in Centennial Today

Don’t wait for the next storm to find the leak in your chimney. Call (833) 842-2139 to book a sweep, an inspection, and any repair the evidence supports, all in one visit. You get a free estimate, a flat price you approve before work starts, and the photos to back it up. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call today for your no-obligation estimate.

Written by the team at Chimney Sweep Centennial.

Why Centennial Chooses Chimney Sweep Centennial

We set the standard for chimney repair in Centennial.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Centennial

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Centennial Customers Say

Trusted by homeowners across Centennial and surrounding areas.

★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Neil Parker
★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Sarah Meyer
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Shannon Gallagher

Ready for Chimney Repair in Centennial?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Centennial.

(833) 842-2139

Request a Free Estimate in Centennial

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7