Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Centennial Homeowners
Most chimney problems in Centennial announce themselves quietly, if at all. A hairline crack in a flue tile, a cap that a windstorm nudged loose, creosote packed a third of the way up the smoke chamber – none of it shows from the living room, and none of it fixes itself over a summer of disuse. A proper inspection is how you find out what your flue actually needs before the first fire of the season. Our technicians have up to 13 years of experience reading exactly these conditions, and we’re honest about what can safely wait and what shouldn’t. We answer 24/7 at (833) 842-2139. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
Fireplace Inspection focuses on the firebox and the parts of the system you actually see and use – the firebox walls, damper, smoke shelf, and the first stretch of flue above the throat. You need one whenever you move into a home with a fireplace, after a long stretch without a fire, or any time smoke starts behaving differently than it used to. We check firebox joints for gaps, test the damper for a clean open-and-close, and look for rust scale or crumbling mortar that suggests moisture is getting in. A fireplace inspection in Centennial typically runs $120 to $250 depending on how much of the firebox needs close examination. The written estimate sets the final price.
Firebox and Damper Checks
Masonry fireboxes crack along the mortar joints first, and those gaps let heat reach framing behind the brick. We probe the joints and look for white efflorescence, which points to water moving through the masonry. Dampers get tested by hand and by eye, because a damper that sticks partway open quietly leaks heat all winter.
Smoke Shelf and Throat
The smoke shelf sits just behind the damper and catches everything that falls down the flue. When it’s packed with debris, smoke rolls forward into the room instead of rising. We clear it and check the throat for warping or gaps that would pull air from the wrong place.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the full exterior and interior of the system, from the crown at the top of the stack down to the appliance connection. You need this level of service when you’ve bought an older home, gone more than a season without service, or noticed staining, rust, or a smell in the firebox during warm months. We work through the whole assembly in one visit rather than handing findings to a second contractor. Because we sweep, inspect, and repair under one roof, what we find is what we can fix. A full chimney inspection in Centennial usually costs $150 to $350, with the range driven by roof access and how many flue connections the system has. The written estimate sets the final price.
Exterior and Crown Assessment
We check the crown for cracks, the flashing where the chimney meets the roofline, and the brick or siding for spalling. A crown that has pulled away from the flue lets meltwater straight into the masonry below. Famco caps and Copperfield venting components are what we reach for when a repair is warranted.

Appliance Connections
Gas appliances connect to the flue through a vent connector, and those joints are a common spot for corrosion or a loose fit. We confirm the connector slopes correctly and that the liner is rated for the appliance it serves. If we find a mismatch, we tell you plainly rather than working around it.

Chimney Flue Inspection
Chimney Flue Inspection is a close look at the liner itself – the tile, clay, or steel tube that carries smoke and gases out of the house. The flue is the part you can’t see, and it’s the part that matters most, since a cracked or displaced liner lets heat and carbon monoxide into the structure around it. We examine every flue in the chimney, including the ones serving water heaters and furnaces, not just the fireplace flue. When the liner needs work, HeatShield resurfacing can restore a clay flue from the inside, and DuraFlex flexible liner systems handle relining jobs where the old flue is beyond repair. A flue inspection in Centennial typically runs $150 to $300 depending on how many flues the chimney contains and how much video time the job needs. The written estimate sets the final price.
Tile and Joint Integrity
Clay flue tiles crack from heat cycling and mortar joints between tiles open as the chimney moves with the seasons. We look for gaps wider than a hairline and for tiles that have shifted out of alignment. A displaced tile changes the draft path and can catch creosote where a brush won’t reach.
Draft and Sizing
A flue that’s too large for the appliance runs cold and drafts poorly; too small and it backs up. We compare the flue’s cross-section to the appliance it serves and check the draft under working conditions. Getting that ratio right is the difference between a fireplace that draws cleanly and one that smokes into the room.
Chimney Fire
Chimney Fire leaves evidence behind even when it burned itself out before anyone noticed – and that evidence matters, because a chimney that has survived one fire is often weakened where you can’t see it. Creosote that has built up in layers ignites when the flue gets hot enough, and the fire can crack tiles, warp a damper, or scorch the top of the stack. Any chimney that has had a fire needs a full inspection before it’s used again, no exceptions. We check for cracked tiles, heat-damaged mortar, and a puffy, honeycombed creosote texture that signals the flue ran hot. Post-fire inspection work in Centennial typically runs $200 to $400 depending on damage and access. The written estimate sets the final price.
Recognizing the Signs
A roar like a low-flying plane, a pop from the flue, or black smoke curling from the top of the stack all point to a chimney fire in progress. Afterward you may find puffy deposits, warped metal, or a heat discoloration on the cap. Any of those means stop using the fireplace until it’s looked at.
Creosote Grades
Creosote builds in three stages, from a light soot you can brush away to a glazed, tar-like layer that needs chemical treatment before a sweep. The glazed stage is what fuels a chimney fire. We note the grade during every sweep and inspection so you know where your flue stands.
Level 2 Chimney Inspection
Level 2 Chimney Inspection goes further than a standard visual check, adding video scanning of the flue interior and a close look at the accessible portions of the attic, crawl space, and roof. You need one when you buy or sell a home, after a chimney fire or earthquake, after a major weather event, or when you’re changing the appliance connected to the flue. It’s the level most real estate transactions call for and the one that catches problems a look up the flue from the firebox can’t reach. We run the video scan and hand you the footage along with a written report. A Level 2 inspection in Centennial typically runs $250 to $450 depending on roof access and complexity. The written estimate sets the final price.
Video Scan of the Flue
A camera on a flexible rod travels the full length of the flue while we watch on a monitor and record it. The footage shows cracks, gaps, offsets, and creosote accumulation in real detail. You get to see it too, which is the point.
Attic and Crawl Space Checks
We look at the chimney where it passes through the attic and check the clearance to combustibles along the way. Insulation packed against a flue or a hidden crack in that stretch is easy to miss without eyes on it. That’s where a Level 2 finds things a firebox view can’t.
Chimney Leak
Chimney Leak almost always traces back to the top of the stack or the flashing at the roofline, not to the flue itself – water finds the crown, the cap, or the metal flashing where it meets the shingles, and works its way down through the masonry. You need to track it down when you see staining on the ceiling near the chimney, rust on the damper or firebox, or white mineral deposits on the brick. We inspect the crown, flashing, and cap, then check the interior for where the water is actually landing. Wait too long and freeze-thaw cycles make small cracks bigger each winter, which is a real concern in Centennial’s cold months. Leak diagnosis in Centennial typically runs $150 to $350 depending on how much of the flashing and crown needs investigation. The written estimate sets the final price.
Crown and Cap Failures
The crown is the sloped concrete cap at the top of the chimney, and it takes the worst of the weather. When it cracks or pulls away from the flue, water runs in around the edge. A properly fitted Famco cap keeps rain and animals out while letting gases escape.
Flashing and Roof Seams
Flashing is the metal that seals the gap between the chimney and the roof, and it’s the single most common leak point. We check the step flashing, the counter-flashing set into the masonry, and the sealant along the top edge. A failed seam here sends water straight into the attic.
Chimney Camera Inspection
Chimney Camera Inspection uses a video camera to look at what no one can see from the firebox or the roof – the full interior run of the flue. It’s the tool that settles arguments about whether that hairline crack is cosmetic or structural, and you should ask for it any time a repair is being recommended. We use camera scanning as a standard part of diagnosing liner issues, which is exactly why we don’t recommend liner work without footage to show you. Every camera inspection comes with a photo report you can look at yourself. A camera inspection in Centennial typically runs $150 to $300 depending on the length of the run and how many flues are involved. The written estimate sets the final price.
What the Camera Reveals
Video shows the true condition of the liner, the severity of creosote buildup, and whether previous repairs held. It also catches gaps at the thimble where an appliance connector enters the flue. Seeing the actual surface is very different from reading a description of it.
The Photo Report
We record the scan and leave you with stills of every problem spot, labeled by location in the flue. If a second opinion is ever needed, you have the evidence to get one. Nothing gets repaired that we can’t show you in a photo first.
Brands We Service
We work with professional-grade product lines because they’re what actually holds up in a chimney, not what’s cheapest to stock. When a clay flue needs resurfacing, HeatShield is the system we use – it goes on as a cast-in-place liner that bonds to the existing tile and smooths out cracks and gaps without a full rebuild. For relining jobs where the old flue can’t be saved, we install DuraFlex flexible liner systems, which handle offsets and irregular flues that a rigid liner won’t pass through.
On the exterior side, we fit Famco caps and dampers, and we work with Copperfield venting components for appliance connections. Gelco and Olympia Chimney round out the product lines we’re proficient with. The right material for the repair matters more than whatever’s closest to hand – and whether you have a HeatShield-lined flue, a DuraFlex reline, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling into the room. A fireplace that used to draw well and now doesn’t usually has a blockage, a flue sizing problem, or a damaged smoke shelf. Don’t keep burning and hope it clears.
- Strong smell from the firebox in warm weather. That odor is creosote off-gassing, and it’s a sign buildup has reached the point where a sweep is due. It’s also a mild warning about what a hot fire could ignite.
- Staining on the ceiling or rust on the damper. Water is getting into the system somewhere, and it’s either the crown, the cap, or the flashing. Freeze-thaw cycles turn small cracks into big ones fast.
- White or black deposits on the exterior brick. Efflorescence means moisture is moving through the masonry, and it points to a leak or a crown failure. Catching it early is far cheaper than repairing spalled brick.
- A recent chimney fire, even a small one. A fire you didn’t call the fire department for still did damage. The flue needs a full inspection before the next fire is lit, not a week later.
Our Process, Step by Step
- 1
We ask before we look. What you burn, how often, whether the appliance is gas or wood, and what you’ve noticed – smoke smell, poor draw, water stains. That context shapes where we focus.
- 2
We sweep before we inspect. Creosote and soot hide cracks and gaps, so we brush the flue first. You can’t inspect what you can’t see, and we’d rather not guess.
- 3
We run a camera through the flue. Video scanning from the firebox to the top of the stack shows the liner’s actual condition. We narrate what we’re seeing so you’re following along.
- 4
We check the exterior and the roof connection. Crown, flashing, cap, and brick. We test the damper by hand and look for the small failures that let water and animals in.
- 5
We write it up and hand you the footage. Every finding gets a recommended fix and a written estimate. Where a repair can safely wait, we tell you that too, and nothing gets scheduled until you’ve seen the evidence.
How Much Does Chimney Inspection Cost in Centennial?
A typical fireplace inspection in Centennial runs $120 to $250 depending on how much of the firebox needs a close look. A standard chimney inspection runs $150 to $350, a flue inspection with camera work sits at $150 to $300, and a full Level 2 inspection with video scanning and attic and crawl space access runs $250 to $450. Post-chimney-fire assessments and leak diagnosis both fall in the $150 to $400 range, depending on damage and how much flashing needs investigating.
What drives the price is access and complexity, not much else. A single-flue chimney on a low, walkable roof takes less time than a two-story chase with a steep pitch and three flues stacked together. Old masonry with a cap set tight to the crown adds inspection time, and so does a chimney with multiple appliance connections to trace. None of that is a reason to skip the work – a small crack found now is a cheap fix, and the same crack found after the liner collapses is not.
You avoid overpaying by asking for the camera footage and the written findings before you approve anything. If a contractor recommends a full reline without showing you the inside of the flue, get a second opinion. Our approach is inspection-first: we diagnose the problem, show you the evidence, and then recommend the repair the evidence supports. When the flue has simply been neglected and needs a sweep, we tell you that instead.
Every estimate is free, and the written estimate sets the final price. Call (833) 842-2139 to book an inspection in Centennial.
Our Service Area Near Centennial
We serve homeowners across Centennial and the surrounding south-metro communities, from Centennial and Cherry Creek out to Lone Tree, Stonegate, Parker, The Pinery, and Castle Rock. Highlands Ranch and Roxborough Park are well within our regular coverage, and we book Cherry Creek and Dove Valley on a standard schedule as well. Call to book the next open slot, and we’ll confirm a window that fits.
Serving Centennial, CO – Our Local Coverage Area
We serve Centennial and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Centennial
A chimney inspection is an examination of the fireplace, flue, and exterior components to check for cracks, blockages, creosote buildup, and water intrusion. It’s how you find out whether the system is safe to use before you light a fire. We use a camera to scan the full flue length, then check the crown, cap, and flashing on top. Some inspections are a quick visual check, and some are a full Level 2 with video and attic access – the right one depends on your situation.
A typical inspection takes 45 minutes to an hour and a half, and a Level 2 with full video scanning usually runs a bit longer. How long depends on the number of flues, how much video work is needed, and how easy it is to access the roof and attic. We don’t rush it, because finding the small stuff is the whole point.
Chimney inspections in Centennial typically range from $120 to $450, with the low end covering a fireplace-focused inspection and the high end covering a full Level 2 with video scanning and attic access. The written estimate sets the final price, and there’s no surprise charge afterward. Call (833) 842-2139 for an exact quote – estimates are free.
Yes, we work with both. HeatShield resurfacing is what we use to restore a clay flue from the inside when the tile is cracked but still standing, and DuraFlex flexible liners are for relining jobs where the old flue has to be replaced. We also fit Famco caps and dampers and work with Copperfield venting components. If you have a HeatShield-lined or DuraFlex-reline chimney, we’ll know what we’re looking at.
Same-day service is often available when the schedule allows, and we’ll confirm the earliest opening when you call. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside those dispatch hours gets booked into the next opening. Call (833) 842-2139 to check availability.
We back our work and will return if something doesn’t perform as it should. The exact warranty terms depend on the repair and the materials used – HeatShield and DuraFlex installations carry their own manufacturer terms, which we walk you through before any work is booked. We won’t schedule a repair until you’ve seen the evidence and the written estimate.
Clear the hearth and the area in front of the fireplace so we have room to work, and move anything breakable off the mantel. If you know how long it’s been since the last sweep, tell us – it helps us anticipate buildup. Also note whether the fireplace draws well, smokes, or smells during warm months; that context sharpens the inspection.
Schedule Your Chimney Inspection Service in Centennial Today
Book a chimney inspection in Centennial before the next burning season and find out exactly what your flue needs – swept clean, inspected thoroughly, and repaired to last with professional-grade materials. Every inspection comes with camera footage you can see for yourself, and nothing gets recommended without evidence to back it up. Call (833) 842-2139 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Centennial.