Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Stonegate, CO
Chimney inspection in Stonegate, CO is the service most homeowners here actually need first, because the houses were built with prefabricated metal fireplaces and factory venting rather than the masonry stacks you find in older Denver neighborhoods. Those systems fail differently, and they need to be read correctly. Our technicians have up to 13 years of experience with exactly this kind of direct-vent and B-vent construction, and we work with professional-grade materials from HeatShield, Gelco, Olympia Chimney, and Famco rather than whatever is cheapest to order. Call (833) 842-2139. We answer 24/7.
Why Stonegate Homes Are Different
Most of Stonegate was built from the late 1980s through the 2000s, and the fireplaces came with the house as part of the original construction. That means prefabricated metal fireboxes, direct-vent or B-vent chimney systems, and termination caps mounted at or near roof level on the rear wall instead of on a full chimney stack. Work here centers on manufacturer-specific venting, termination caps, and chase covers. Tuckpointing and flue-tile repair, the bread and butter of older masonry work, rarely come up.
The climate adds its own pressure. Stonegate sits at roughly 6,000 feet in the Colorado Piedmont, with cold winters, intense freeze-thaw cycling, and frequent high winds. Those conditions chew through exterior caps and chase covers, and they drive creosote buildup across a long heating season. In many Stonegate subdivisions the builder-grade termination sits low on a rear wall, so technicians routinely find wind-driven snow intrusion and bird or rodent nesting inside the vent termination. That pattern is rare in neighboring Castle Rock or Parker, where taller masonry chimneys still predominate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Stonegate Services
Stonegate homeowners call us most often about two things: getting the flue properly swept before the heating season, and repairing the venting and caps that the wind and freeze-thaw have worn down. Each has its own page, and each links below.
Chimney Sweep in Stonegate
A sweep on a prefab or direct-vent system in Stonegate is a different job than sweeping a masonry flue. We clean the firebox, the venting run, and the termination, then check that the cap and chase cover are actually sealing the assembly. Between the long heating season and the wind-driven debris that collects in rear-wall terminations, creosote and nesting material build up faster than most owners expect. If you burn wood regularly, this is the annual chore you don’t want to skip. Read more about Chimney Sweep in Stonegate.

Chimney Repair in Stonegate
Repair here usually means something other than brick and mortar. Common Stonegate calls involve a cracked or missing termination cap, a chase cover that has pulled loose or rusted through, a damper that no longer seals, or a vent section that has separated from the appliance collar. High winds and freeze-thaw are the main culprits on the exterior, and they’re the reason caps fail before anything inside does. We diagnose first, then recommend only what the inspection supports, using components from brands like Famco. See Chimney Repair in Stonegate.

Chimney Inspection in Stonegate
Chimney inspection in Stonegate is an evaluation of a factory-built venting system, not a masonry assessment. Homes here were largely built from the late 1980s through the 2000s with prefabricated fireplaces and direct-vent or B-vent chimneys installed during original construction, and those assemblies fail in specific ways: separated vent sections, degraded gaskets, loose terminations, and caps that no longer keep out wind-driven snow. Because Stonegate sits near 6,000 feet with hard freeze-thaw cycles and frequent high winds, the exterior parts wear out well before the firebox does. A proper chimney inspection tells you which of those you actually have, with photographs you can look at yourself, before anyone recommends a thing.
Fireplace Inspection
Signs you need it
You need a fireplace inspection if the firebox panels show cracks or gaps, the glass doors or screen have warped with heat, or you simply don’t know when the fireplace was last looked at before you bought the house.
What it costs in Stonegate
A fireplace inspection typically runs $99 to $189 in Stonegate, and the written estimate sets the final price.
How we do it
We check the firebox and refractory panels, the damper operation, the appliance connection and clearances, and the vent termination at the exterior wall, then photograph every finding and walk you through it.
Chimney Inspection Services
Signs you need it
Book this when you’ve moved into a Stonegate home and don’t have records for the fireplace, or when a prior company told you work was needed without showing you anything to support it.
What it costs in Stonegate
A standard chimney inspection generally falls between $99 and $249 in Stonegate depending on access and how much venting is involved, confirmed by the written estimate.
How we do it
We inspect the full assembly from firebox to termination, document the condition of the venting and chase cover, and hand you a written report with pictures so the findings aren’t something you have to take on faith.
Chimney Fire
Signs you need it
Call for an inspection after any chimney fire, and also if you’ve noticed a loud roaring sound, puffed creosote flakes on the roof, or discolored metal around the venting.
What it costs in Stonegate
Post-fire inspection and damage assessment in Stonegate typically runs $150 to $400, since venting sections and terminations often need close examination, with the written estimate setting the final figure.
How we do it
We inspect the entire venting assembly for heat distortion, warped sections and compromised gaskets, then document what survived and what has to be replaced before the appliance is used again.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is called for when a home changes hands, after an event like a chimney fire or a strong windstorm, or when any change has been made to the appliance or venting.
What it costs in Stonegate
Level 2 inspections in Stonegate typically range from $150 to $400 because they include a camera look at concealed venting, and the written estimate confirms the price.
How we do it
We run a camera through the venting to see what’s hidden behind the chase and walls, check every joint and connection, and record the whole thing so you have documentation for insurance or resale.
What Chimney Inspection Costs in Stonegate
| Item | Typical range in Stonegate |
|---|---|
| Standard chimney inspection | $99 – $249 |
| Level 2 inspection with camera | $150 – $400 |
| Fireplace inspection | $99 – $189 |
Do I really need a Level 2 inspection on a Stonegate prefab chimney?
Yes, if the home has changed hands, the appliance or venting was altered, or there’s been a chimney fire or wind event. Concealed vent sections are exactly where prefab systems fail, and only a camera inspection on a Level 2 shows them.
How often should a Stonegate chimney be inspected?
Once a year is the standard, and for a heavily used wood fireplace we’d add a sweep at the same visit. Stonegate’s long heating season and wind-driven debris make annual inspection the practical interval here.
Brands We Service in Stonegate
We work with recognized industry-grade product lines rather than generic substitutes: HeatShield and Gelco for liner resurfacing and sealing, Olympia Chimney and Famco for venting, caps and dampers. Turnaround depends on what the inspection finds and whether the component needs to be ordered. You can see the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Stonegate, CO
| Service | Typical range in Stonegate |
|---|---|
| Standard chimney inspection | $99 – $249 |
| Level 2 inspection with camera | $150 – $400 |
| Fireplace inspection | $99 – $189 |
| Post-fire inspection and assessment | $150 – $400 |
| Chimney sweep | $129 – $299 |
| Chimney repair | $199 – $1,500 |
| Chimney cap repair or replacement | $150 – $550 |
| Chase cover repair | $250 – $900 |
| Damper repair or replacement | $200 – $650 |
| HeatShield liner resurfacing | $1,200 – $3,500 |
| DuraFlex relining | $2,500 – $6,000 |
What pushes a Stonegate price up is usually access and exterior wear: a termination mounted low on a rear wall, a chase cover that has rusted through, or venting that needs a camera run to diagnose. The written estimate sets the final price, and nothing is recommended before you’ve seen the inspection findings yourself.
Neighborhoods We Serve in Stonegate
We work throughout Stonegate and the surrounding Douglas County communities, covering the two-story and ranch homes that make up most of the area’s housing stock. Dispatch runs from 7am to 7pm, Sunday through Friday, so the response window is straightforward wherever you are in the neighborhood. If you’re not sure whether your street falls inside our coverage, a quick call sorts it out.
- Stonegate Village
- Stonegate North
- The ranch-style homes along the eastern edge of the community
- The two-story subdivisions off the main Stonegate entry roads
Service Area – Cities Near Stonegate
Stonegate sits close to several communities we also serve, and the housing stock shifts as you cross each boundary, which changes what an inspection looks for. In Parker, CO and Castle Rock, CO you’ll find more tall masonry chimneys than the prefab systems typical here. Dove Valley, CO and Lone Tree, CO have their own mix of newer construction and older homes. Call (833) 842-2139 with your address and we’ll confirm coverage. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Stonegate, CO – Our Local Coverage Area
We serve Stonegate and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Stonegate
Dispatch runs 7am to 7pm, Sunday through Friday, and we schedule around that window. Call (833) 842-2139 and we’ll book the visit that works for you.
Some do, particularly for anything that changes the exterior look of a cap or chase cover. Ask your HOA before the visit, and we’ll tell you exactly what the proposed work involves so you can submit it accurately.
Yes, we serve Stonegate and the nearby Douglas County communities including Parker, Castle Rock, Dove Valley and Lone Tree. Call (833) 842-2139 and we’ll confirm your address is in the dispatch area.
If your Stonegate home’s fireplace hasn’t been looked at in a few seasons, the honest first step is an inspection you can see the results of. Call (833) 842-2139 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Stonegate Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Neil Parker"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Sarah Meyer"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Shannon Gallagher