Chimney Inspection in Centennial, CO | Chimney Sweep Centennial

Chimney Inspection in Centennial - Flat-Price Sweep, Photo Report Included

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Inspection for Centennial Homeowners

Most chimney problems in Centennial announce themselves quietly, if at all. A hairline crack in a flue tile, a cap that a windstorm nudged loose, creosote packed a third of the way up the smoke chamber – none of it shows from the living room, and none of it fixes itself over a summer of disuse. A proper inspection is how you find out what your flue actually needs before the first fire of the season. Our technicians have up to 13 years of experience reading exactly these conditions, and we’re honest about what can safely wait and what shouldn’t. We answer 24/7 at (833) 842-2139. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (833) 842-2139

Fireplace Inspection

Fireplace Inspection focuses on the firebox and the parts of the system you actually see and use – the firebox walls, damper, smoke shelf, and the first stretch of flue above the throat. You need one whenever you move into a home with a fireplace, after a long stretch without a fire, or any time smoke starts behaving differently than it used to. We check firebox joints for gaps, test the damper for a clean open-and-close, and look for rust scale or crumbling mortar that suggests moisture is getting in. A fireplace inspection in Centennial typically runs $120 to $250 depending on how much of the firebox needs close examination. The written estimate sets the final price.

Firebox and Damper Checks

Masonry fireboxes crack along the mortar joints first, and those gaps let heat reach framing behind the brick. We probe the joints and look for white efflorescence, which points to water moving through the masonry. Dampers get tested by hand and by eye, because a damper that sticks partway open quietly leaks heat all winter.

Smoke Shelf and Throat

The smoke shelf sits just behind the damper and catches everything that falls down the flue. When it’s packed with debris, smoke rolls forward into the room instead of rising. We clear it and check the throat for warping or gaps that would pull air from the wrong place.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Inspection Services

Chimney Inspection Services cover the full exterior and interior of the system, from the crown at the top of the stack down to the appliance connection. You need this level of service when you’ve bought an older home, gone more than a season without service, or noticed staining, rust, or a smell in the firebox during warm months. We work through the whole assembly in one visit rather than handing findings to a second contractor. Because we sweep, inspect, and repair under one roof, what we find is what we can fix. A full chimney inspection in Centennial usually costs $150 to $350, with the range driven by roof access and how many flue connections the system has. The written estimate sets the final price.

Exterior and Crown Assessment

We check the crown for cracks, the flashing where the chimney meets the roofline, and the brick or siding for spalling. A crown that has pulled away from the flue lets meltwater straight into the masonry below. Famco caps and Copperfield venting components are what we reach for when a repair is warranted.

Exterior and Crown Assessment

Appliance Connections

Gas appliances connect to the flue through a vent connector, and those joints are a common spot for corrosion or a loose fit. We confirm the connector slopes correctly and that the liner is rated for the appliance it serves. If we find a mismatch, we tell you plainly rather than working around it.

Appliance Connections
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 842-2139

Chimney Flue Inspection

Chimney Flue Inspection is a close look at the liner itself – the tile, clay, or steel tube that carries smoke and gases out of the house. The flue is the part you can’t see, and it’s the part that matters most, since a cracked or displaced liner lets heat and carbon monoxide into the structure around it. We examine every flue in the chimney, including the ones serving water heaters and furnaces, not just the fireplace flue. When the liner needs work, HeatShield resurfacing can restore a clay flue from the inside, and DuraFlex flexible liner systems handle relining jobs where the old flue is beyond repair. A flue inspection in Centennial typically runs $150 to $300 depending on how many flues the chimney contains and how much video time the job needs. The written estimate sets the final price.

Tile and Joint Integrity

Clay flue tiles crack from heat cycling and mortar joints between tiles open as the chimney moves with the seasons. We look for gaps wider than a hairline and for tiles that have shifted out of alignment. A displaced tile changes the draft path and can catch creosote where a brush won’t reach.

Draft and Sizing

A flue that’s too large for the appliance runs cold and drafts poorly; too small and it backs up. We compare the flue’s cross-section to the appliance it serves and check the draft under working conditions. Getting that ratio right is the difference between a fireplace that draws cleanly and one that smokes into the room.

Chimney Fire

Chimney Fire leaves evidence behind even when it burned itself out before anyone noticed – and that evidence matters, because a chimney that has survived one fire is often weakened where you can’t see it. Creosote that has built up in layers ignites when the flue gets hot enough, and the fire can crack tiles, warp a damper, or scorch the top of the stack. Any chimney that has had a fire needs a full inspection before it’s used again, no exceptions. We check for cracked tiles, heat-damaged mortar, and a puffy, honeycombed creosote texture that signals the flue ran hot. Post-fire inspection work in Centennial typically runs $200 to $400 depending on damage and access. The written estimate sets the final price.

Recognizing the Signs

A roar like a low-flying plane, a pop from the flue, or black smoke curling from the top of the stack all point to a chimney fire in progress. Afterward you may find puffy deposits, warped metal, or a heat discoloration on the cap. Any of those means stop using the fireplace until it’s looked at.

Creosote Grades

Creosote builds in three stages, from a light soot you can brush away to a glazed, tar-like layer that needs chemical treatment before a sweep. The glazed stage is what fuels a chimney fire. We note the grade during every sweep and inspection so you know where your flue stands.

Level 2 Chimney Inspection

Level 2 Chimney Inspection goes further than a standard visual check, adding video scanning of the flue interior and a close look at the accessible portions of the attic, crawl space, and roof. You need one when you buy or sell a home, after a chimney fire or earthquake, after a major weather event, or when you’re changing the appliance connected to the flue. It’s the level most real estate transactions call for and the one that catches problems a look up the flue from the firebox can’t reach. We run the video scan and hand you the footage along with a written report. A Level 2 inspection in Centennial typically runs $250 to $450 depending on roof access and complexity. The written estimate sets the final price.

Video Scan of the Flue

A camera on a flexible rod travels the full length of the flue while we watch on a monitor and record it. The footage shows cracks, gaps, offsets, and creosote accumulation in real detail. You get to see it too, which is the point.

Attic and Crawl Space Checks

We look at the chimney where it passes through the attic and check the clearance to combustibles along the way. Insulation packed against a flue or a hidden crack in that stretch is easy to miss without eyes on it. That’s where a Level 2 finds things a firebox view can’t.

Chimney Leak

Chimney Leak almost always traces back to the top of the stack or the flashing at the roofline, not to the flue itself – water finds the crown, the cap, or the metal flashing where it meets the shingles, and works its way down through the masonry. You need to track it down when you see staining on the ceiling near the chimney, rust on the damper or firebox, or white mineral deposits on the brick. We inspect the crown, flashing, and cap, then check the interior for where the water is actually landing. Wait too long and freeze-thaw cycles make small cracks bigger each winter, which is a real concern in Centennial’s cold months. Leak diagnosis in Centennial typically runs $150 to $350 depending on how much of the flashing and crown needs investigation. The written estimate sets the final price.

Crown and Cap Failures

The crown is the sloped concrete cap at the top of the chimney, and it takes the worst of the weather. When it cracks or pulls away from the flue, water runs in around the edge. A properly fitted Famco cap keeps rain and animals out while letting gases escape.

Flashing and Roof Seams

Flashing is the metal that seals the gap between the chimney and the roof, and it’s the single most common leak point. We check the step flashing, the counter-flashing set into the masonry, and the sealant along the top edge. A failed seam here sends water straight into the attic.

Chimney Camera Inspection

Chimney Camera Inspection uses a video camera to look at what no one can see from the firebox or the roof – the full interior run of the flue. It’s the tool that settles arguments about whether that hairline crack is cosmetic or structural, and you should ask for it any time a repair is being recommended. We use camera scanning as a standard part of diagnosing liner issues, which is exactly why we don’t recommend liner work without footage to show you. Every camera inspection comes with a photo report you can look at yourself. A camera inspection in Centennial typically runs $150 to $300 depending on the length of the run and how many flues are involved. The written estimate sets the final price.

What the Camera Reveals

Video shows the true condition of the liner, the severity of creosote buildup, and whether previous repairs held. It also catches gaps at the thimble where an appliance connector enters the flue. Seeing the actual surface is very different from reading a description of it.

The Photo Report

We record the scan and leave you with stills of every problem spot, labeled by location in the flue. If a second opinion is ever needed, you have the evidence to get one. Nothing gets repaired that we can’t show you in a photo first.

Brands We Service

We work with professional-grade product lines because they’re what actually holds up in a chimney, not what’s cheapest to stock. When a clay flue needs resurfacing, HeatShield is the system we use – it goes on as a cast-in-place liner that bonds to the existing tile and smooths out cracks and gaps without a full rebuild. For relining jobs where the old flue can’t be saved, we install DuraFlex flexible liner systems, which handle offsets and irregular flues that a rigid liner won’t pass through.

On the exterior side, we fit Famco caps and dampers, and we work with Copperfield venting components for appliance connections. Gelco and Olympia Chimney round out the product lines we’re proficient with. The right material for the repair matters more than whatever’s closest to hand – and whether you have a HeatShield-lined flue, a DuraFlex reline, or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Smoke rolling into the room. A fireplace that used to draw well and now doesn’t usually has a blockage, a flue sizing problem, or a damaged smoke shelf. Don’t keep burning and hope it clears.
  • Strong smell from the firebox in warm weather. That odor is creosote off-gassing, and it’s a sign buildup has reached the point where a sweep is due. It’s also a mild warning about what a hot fire could ignite.
  • Staining on the ceiling or rust on the damper. Water is getting into the system somewhere, and it’s either the crown, the cap, or the flashing. Freeze-thaw cycles turn small cracks into big ones fast.
  • White or black deposits on the exterior brick. Efflorescence means moisture is moving through the masonry, and it points to a leak or a crown failure. Catching it early is far cheaper than repairing spalled brick.
  • A recent chimney fire, even a small one. A fire you didn’t call the fire department for still did damage. The flue needs a full inspection before the next fire is lit, not a week later.

Our Process, Step by Step

  1. 1
    We ask before we look. What you burn, how often, whether the appliance is gas or wood, and what you’ve noticed – smoke smell, poor draw, water stains. That context shapes where we focus.
  2. 2
    We sweep before we inspect. Creosote and soot hide cracks and gaps, so we brush the flue first. You can’t inspect what you can’t see, and we’d rather not guess.
  3. 3
    We run a camera through the flue. Video scanning from the firebox to the top of the stack shows the liner’s actual condition. We narrate what we’re seeing so you’re following along.
  4. 4
    We check the exterior and the roof connection. Crown, flashing, cap, and brick. We test the damper by hand and look for the small failures that let water and animals in.
  5. 5
    We write it up and hand you the footage. Every finding gets a recommended fix and a written estimate. Where a repair can safely wait, we tell you that too, and nothing gets scheduled until you’ve seen the evidence.

How Much Does Chimney Inspection Cost in Centennial?

A typical fireplace inspection in Centennial runs $120 to $250 depending on how much of the firebox needs a close look. A standard chimney inspection runs $150 to $350, a flue inspection with camera work sits at $150 to $300, and a full Level 2 inspection with video scanning and attic and crawl space access runs $250 to $450. Post-chimney-fire assessments and leak diagnosis both fall in the $150 to $400 range, depending on damage and how much flashing needs investigating.

What drives the price is access and complexity, not much else. A single-flue chimney on a low, walkable roof takes less time than a two-story chase with a steep pitch and three flues stacked together. Old masonry with a cap set tight to the crown adds inspection time, and so does a chimney with multiple appliance connections to trace. None of that is a reason to skip the work – a small crack found now is a cheap fix, and the same crack found after the liner collapses is not.

You avoid overpaying by asking for the camera footage and the written findings before you approve anything. If a contractor recommends a full reline without showing you the inside of the flue, get a second opinion. Our approach is inspection-first: we diagnose the problem, show you the evidence, and then recommend the repair the evidence supports. When the flue has simply been neglected and needs a sweep, we tell you that instead.

Every estimate is free, and the written estimate sets the final price. Call (833) 842-2139 to book an inspection in Centennial.

Our Service Area Near Centennial

We serve homeowners across Centennial and the surrounding south-metro communities, from Centennial and Cherry Creek out to Lone Tree, Stonegate, Parker, The Pinery, and Castle Rock. Highlands Ranch and Roxborough Park are well within our regular coverage, and we book Cherry Creek and Dove Valley on a standard schedule as well. Call to book the next open slot, and we’ll confirm a window that fits.

Serving Centennial, CO – Our Local Coverage Area

We serve Centennial and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Inspection in Centennial

Schedule Your Chimney Inspection Service in Centennial Today

Book a chimney inspection in Centennial before the next burning season and find out exactly what your flue needs – swept clean, inspected thoroughly, and repaired to last with professional-grade materials. Every inspection comes with camera footage you can see for yourself, and nothing gets recommended without evidence to back it up. Call (833) 842-2139 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Chimney Sweep Centennial.

Why Centennial Chooses Chimney Sweep Centennial

We set the standard for chimney inspection in Centennial.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Centennial

Getting your chimney inspection project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney inspection project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney inspection pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Centennial Customers Say

Trusted by homeowners across Centennial and surrounding areas.

★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Neil Parker
★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Sarah Meyer
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Shannon Gallagher

Ready for Chimney Inspection in Centennial?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Centennial.

(833) 842-2139

Request a Free Estimate in Centennial

Tell us about your chimney inspection needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7