Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Centennial, CO
Chimney inspection in Centennial starts with one fact that surprises a lot of homeowners: almost none of the chimneys here are old brick. Centennial incorporated in 2001 and was built out through the late 1990s and 2000s, so what sits behind the fireplace wall is usually a factory-built prefab firebox with a metal chase and a manufactured venting system, sometimes a gas-log insert that hasn’t been looked at since the house changed hands. Our technicians have up to 13 years of experience reading exactly those systems, and we sweep, inspect, and repair them with professional-grade materials rather than generic parts. Call (833) 842-2139 to book a sweep and inspection.
Why Centennial Homes Are Different
Drive through neighborhoods off Smoky Hill Road and you’re looking at a suburb built inside a narrow window by a handful of production builders. That has a real effect on chimney work. Because whole streets went up within the same ten to fifteen years, technicians see the same prefab fireplace models, the same chase cover layouts, and the same venting quirks repeating from one house to the next. When a particular factory chimney has a known issue with its damper or its termination cap, it tends to show up block after block rather than once in a while.
The other half of the picture is the climate. Centennial sits high on the Front Range with cold, dry winters and hard freeze-thaw swings that push fireplace use into a short, heavy season. Dry air and wind-blown dust mean soot and creosote build up alongside grit, and flues that sit capped but neglected collect debris and the occasional animal nest. There’s very little historic masonry stock here, so most Centennial jobs are Level 1 sweeps on manufactured systems and chase-cover, damper, and venting checks, not brick restoration. Head a few miles north into older Aurora or Denver and the whole profile flips to century-old masonry flues.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Centennial Services
Two jobs come up again and again in Centennial: a sweep and inspection to establish what condition the chimney is actually in, and repair once that inspection finds something that needs fixing.
Chimney Sweep in Centennial
A Centennial sweep on a prefab fireplace is a different job than sweeping an open masonry hearth. We work the firebox, the damper, and the flue with the fireplace’s own construction in mind, then check the chase cover and termination cap up top, since that’s where wind-blown dust and debris collect on these homes. Dry Front Range air doesn’t stop creosote from forming during a busy winter; it just makes the glaze behave differently. Gas-log inserts get their own check for soot and blockage. Book a chimney sweep and we’ll tell you what we find before we touch anything else.

Chimney Repair in Centennial
Repair work here tends toward manufactured components: a damper that no longer seals, a chase cover rusted at the seams, a cap that came loose in a windstorm, or a prefab flue section that’s failed its inspection. We diagnose first and recommend second, which matters when a replacement part has to match the original factory system. For liners we work with HeatShield resurfacing and DuraFlex flexible systems, both of which handle the venting geometry these houses were built with. If your fireplace needs attention, our chimney repair team handles the whole system from firebox to cap.

Chimney Inspection in Centennial
Chimney inspection in Centennial is mostly a story about manufactured systems. The homes around Smoky Hill and the Cherry Creek School District corridor were built with factory chimneys and gas-log inserts, not hand-laid brick, and those systems have their own failure points that only show up when someone actually looks. Dry winters and rapid freeze-thaw cycles stress chase covers and venting joints, while dust and debris load up flues that haven’t been opened in several seasons. An inspection is the only honest way to know which of those you’re dealing with. For a full rundown of what we check, see our Chimney Inspection page.
Fireplace Inspection
Signs you need it
You’ve inherited a house with a gas-log insert you’ve never operated, or the fireplace smells smoky even when it isn’t lit.
What it costs in Centennial
A Level 1 fireplace inspection typically runs $99 – $179 in Centennial, with a Level 2 camera inspection estimated at $199 – $349 depending on the venting configuration.
How we do it
We examine the firebox, damper, glass or screen, gas connection area, and the visible venting, then note condition and any restriction before recommending anything.
Chimney Flue Inspection
Signs you need it
Draft is weak, smoke rolls back into the room, or the flue hasn’t been looked at since you moved into a Centennial home built in the 1990s or 2000s.
What it costs in Centennial
Flue inspection is typically $99 – $179 as part of a standard visit, and a camera-assisted Level 2 flue inspection runs about $199 – $349.
How we do it
We run a camera down the flue to check for cracks, separation, blockage, and creosote glazing, then show you the footage and photograph what we found.
What Chimney Inspection Costs in Centennial
| Item | Typical range in Centennial |
|---|---|
| Level 1 chimney inspection | $99 – $179 |
| Level 2 camera inspection | $199 – $349 |
| Inspection with written photo report | $199 – $349 |
Do I really need a Level 2 inspection in a newer Centennial home?
Not always. A home that’s been continuously occupied and swept on schedule usually only needs Level 2 after a chimney fire, a flue change, or a sale. If any of those apply, you do.
How often should a Centennial chimney be inspected?
Once a year, and again after any chimney fire or before you start using a fireplace that sat idle through a previous owner. Call (833) 842-2139 and estimates are free.
Brands We Service in Centennial
We work with recognized industry-grade product lines rather than whatever’s cheapest to stock: DuraFlex flexible liners, HeatShield resurfacing systems, Gelco components, and Olympia Chimney venting parts. Because most Centennial homes run manufactured chimney systems, matching the right component matters. Turnaround depends on part availability, and we’ll tell you honestly what it is before booking. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Centennial, CO
| Service | Typical range in Centennial |
|---|---|
| Level 1 chimney inspection | $99 – $179 |
| Level 2 camera inspection | $199 – $349 |
| Standard chimney sweep | $149 – $279 |
| Prefab fireplace and flue sweep | $149 – $279 |
| Cap and chase cover repair | $149 – $399 |
| Damper repair or replacement | $199 – $449 |
| Flue liner repair (HeatShield resurfacing) | $599 – $1,499 |
| Full relining with DuraFlex | $1,899 – $4,199 |
What pushes a Centennial price up is the parts, not the labor: a full reline costs more than a sweep because the venting system itself has to be replaced, and matching the factory configuration takes more time than a generic repair. We give you a flat price agreed before we book the work, and the written estimate sets the final number.
Neighborhoods We Serve in Centennial
We serve homeowners across Centennial, from the streets off Smoky Hill Road through the older 1990s tracts and the newer two-story builds on the south side. Because the housing stock was built in one narrow window, most of what we see falls into a handful of predictable categories, which shortens diagnosis on a first visit. Response times across Centennial are typically within a day or two of booking, depending on the season.
- Smoky Hill
- Cherry Creek School District corridor
- Willow Creek
- Foxridge
- Saddle Rock
Service Area – Cities Near Centennial
Our service area extends beyond Centennial into the surrounding south-metro communities. We regularly work in Cherry Creek, CO, where the housing stock starts to mix older masonry chimneys with newer prefab systems, and in Dove Valley, CO and Lone Tree, CO, which share Centennial’s production-builder housing profile almost exactly. To the south and west we cover Highlands Ranch, CO as well. If you’re just outside these boundaries, call and we’ll confirm coverage before booking.
Serving Centennial, CO – Our Local Coverage Area
We serve Centennial and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Centennial
Yes. We cover Centennial from Smoky Hill through the southern two-story neighborhoods, and being a manufactured-system specialist means we’re set up for the prefab fireplaces most of these homes have.
Permits apply to structural changes such as a full reline or chase modification in many municipalities, so ask Centennial’s building department directly for your address. A standard sweep or inspection doesn’t need one.
We usually book a sweep or inspection within a day or two in Centennial. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday.
If your fireplace hasn’t been looked at in a few seasons, or you’ve just moved into a Centennial home and don’t know what’s behind the wall, call (833) 842-2139 for a free estimate. Swept clean. Inspected thoroughly. Repaired to last.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Centennial Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Neil Parker"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Sarah Meyer"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Shannon Gallagher