Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Centennial?
A chimney cap and crown job in Centennial typically costs $450 to $1,600, with most homeowners landing around $700 to $1,100 for a standard cap replacement and crown repair on a single flue. A cap alone usually runs $180 to $450, and a crown rebuild alone usually runs $400 to $1,200 depending on the size and shape of the crown. Those ranges reflect 2026 pricing in the south Denver metro, and your written estimate is what sets the final number.
We treat the cap and crown as two separate jobs that happen to sit on the same chimney. A cap keeps water and animals out of the flue. A crown sheds water off the top of the masonry. When both are failing you’ll usually see rust streaks down the flashing, a cracked or spalling crown, or water stains on the firebox ceiling. Call (833) 842-2139 and we’ll set up a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Key Takeaways
- A chimney cap in Centennial usually costs $180 to $450, and a crown rebuild usually costs $400 to $1,200.
- Doing both at once typically saves $150 to $300 over scheduling them separately, because the technician is already on the roof.
- Larger multi-flue chimneys and shaped or oversized crowns push the total higher.
- Repairing a crown early costs far less than repairing the masonry below it later.
- Every job in Centennial starts with an inspection, so we recommend a repair only after we’ve diagnosed what the crown and cap actually need.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s what the line items look like for Centennial homes. Everything below is an estimate, and the written estimate you get after an inspection is the number that governs the work.
| Line Item | Typical Cost Range | What It Covers |
|---|---|---|
| Standard single-flue cap (galvanized or stainless) | $180 – $320 | Cap, screen, and installation on a standard flue |
| Custom or multi-flue cap | $320 – $450 | Oversized cap sized to a multi-flue chimney top |
| Stainless upgrade over galvanized | Add $40 – $90 | Longer service life in Colorado weather |
| Crown repair (crack fill and reseal) | $400 – $650 | Patching hairline cracks, resealing the crown edge |
| Crown rebuild (full crown replacement) | $650 – $1,200 | Removing the old crown, forming and finishing a new one |
| Crown rebuild on an oversized or shaped crown | $1,200 – $1,600 | Larger footprint or non-square crown |
| Crown seal (waterproofing coat) | $150 – $350 | Breathable masonry sealer applied to a sound crown |
| Inspection before the work | Free with the estimate | Assessment of cap, crown, flashing, and flue condition |
The biggest driver of the total is whether the crown needs a patch or a rebuild. A hairline crack that hasn’t reached the masonry below is a repair. A crown that’s pulled away from the flue, or has spalled and left the mortar bed exposed, needs to come off and be rebuilt. Multi-flue chimneys cost more because the crown footprint is larger and the cap has to span more openings. And if the inspection turns up a failed flue liner or rusted flashing, that’s separate work on top of the cap and crown.
What Affects Chimney Cap & Crown Pricing in Centennial
- Chimney size and flue count. A single-flue chimney has a small crown and a small cap. A chimney with two or three flues has a wider footprint, a heavier cap, and more material to form, which is why the upper end of the ranges shows up on larger masonry chimneys around Centennial.
- Cap material. Galvanized caps are the least expensive and the first to rust in a climate that swings from dry, windy spring days to summer hail and hard winter freezes. Stainless steel costs more up front and holds up far better through the freeze-thaw cycles that work on a chimney top all year.
- Crown condition. A crown with a single hairline crack can be repaired and resealed. A crown that’s crumbled, separated from the flue, or sloping water toward the masonry needs to be rebuilt. The difference between the two is often $300 to $500.
- Roof pitch and access. A steep roof, a tall chimney, or a chimney set back from the ridge line takes longer to work on safely. That labor shows up in the estimate.
- What the inspection finds underneath. If the crown has been leaking for a while, the masonry below may be saturated, spalling, or missing mortar. Crown work tends to uncover that, and it needs to be dealt with before a new crown goes on top.
- Add-on liner work. If a camera inspection during the same visit shows a cracked flue, relining is priced separately. That’s where our DuraFlex and HeatShield capability matters, since those are the systems we work with rather than generic liner stock.
How to Save on Chimney Cap & Crown
The most reliable way to save is to catch the crown before it fails. A crown seal on a sound crown costs a fraction of a rebuild, and it’s the single cheapest thing you can do to keep water out of the masonry. Have the crown looked at every few years, especially on an older Centennial home you’ve just moved into.
When the crown does need work, bundle it with the cap replacement in one visit. A technician on the roof with the scaffolding set is already most of the way to a cap install, and doing both together usually saves $150 to $300 compared to two separate appointments. If you’ve gone several seasons without service, it’s also worth combining the cap and crown work with a chimney sweep Centennial homeowners can schedule in the same visit, so the flue gets cleaned and the top of the chimney gets addressed at the same time.
Look at your flue cap before you call. If the cap is solid and the screen is intact, the cap replacement may not be necessary and you’re only dealing with the crown. Our inspection is free with the estimate, so there’s no cost to finding out which part of the job you actually need.
Long term, the cheapest path is choosing a stainless cap over a galvanized one when the chimney needs a new cap anyway. The upcharge is small, the useful life is much longer, and you’re not paying installation labor twice. That’s why we work with Famco and Copperfield for caps, dampers, and venting components rather than whatever a home center has on the shelf.
Why Crown and Cap Work Together
A cap without a sound crown just keeps rain out of the flue while water keeps soaking into the masonry around it. A sound crown without a cap lets water pour straight down the flue and lets birds and squirrels nest on the smoke shelf. The two pieces of the chimney top do two different jobs, and repairing one while leaving the other failing is how a small job turns into a masonry repair later.
The crown is the concrete or mortar surface that slopes away from the flue. Its whole purpose is to shed water off the top of the chimney instead of into it. When it cracks, water follows the crack, freezes, expands, and widens it. Centennial’s freeze-thaw pattern is hard on crowns for exactly this reason: water gets in during a warm afternoon and refreezes that night. The cap sits on top of the flue opening and keeps rain, snow, and animals out of the chimney itself.
This is why we inspect before we recommend. A chimney inspection isn’t an upsell – it’s the only honest way to know what your flue actually needs. From liner to cap, we handle the whole system, and the same company that inspects also repairs, so findings are never passed off to a stranger.
Can You Replace a Chimney Cap or Crown the Same Day?
A cap replacement is usually a same-day job if the cap is a standard size and the flue opening matches. Crown repair can sometimes be done the same day, though a full crown rebuild usually needs a return visit because the mortar has to set before it takes weather. Call (833) 842-2139 and we’ll give you a straight answer on timing when we schedule the estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
When Should You Call About a Cap or Crown?
Call when you see rust streaks on the cap or the flashing, a visible crack or gap in the crown, water stains on the firebox ceiling or smoke chamber, or a chimney that smells musty when it’s damp out. Call sooner if you’ve had critters on the roof near the chimney or the crown slopes toward the masonry instead of away from it. The Centennial area sees enough freeze-thaw movement that a small crown crack rarely stays small through a winter.
Is It Cheaper to Repair or Replace a Chimney Crown?
Repair is cheaper when the crown is structurally sound and only cracked at the surface: $400 to $650 versus $650 to $1,200 for a rebuild. Once the crown has separated from the flue, has multiple deep cracks, or the mortar bed underneath is exposed, repairing it just delays a rebuild and risks water damage to the masonry below.
Frequently Asked Questions – Chimney Cap & Crown Cost
How much does a chimney cap cost in Centennial?
A chimney cap in Centennial typically costs $180 to $450 installed, depending on whether it’s a standard single-flue cap or a custom multi-flue cap, and whether you choose galvanized or stainless steel. Stainless adds roughly $40 to $90 and lasts considerably longer in our climate. Call (833) 842-2139 for an exact quote – estimates are free.
How much does a chimney crown rebuild cost?
A full crown rebuild typically costs $650 to $1,200 in Centennial, and oversized or shaped crowns can run $1,200 to $1,600. A crown repair on hairline cracks runs $400 to $650. The estimate after inspection tells you which one your chimney actually needs. Call (833) 842-2139 for a free estimate.
Is it cheaper to repair or replace a chimney cap?
Replacing is usually the better value once a cap is rusted through or a screen is torn, since a repair on a failing cap often costs most of the way to a new one. A new galvanized cap installed runs $180 to $320, and a stainless cap adds $40 to $90 on top. Call (833) 842-2139 – we’ll price the replacement and tell you honestly if a repair would hold.
How much does crown sealing cost in Centennial?
Crown sealing typically runs $150 to $350 and only makes sense on a crown that’s still sound. It’s the cheapest way to slow water absorption before cracks open up. If the inspection shows the crown is already failing, sealing won’t fix it. Call (833) 842-2139 to find out which category your crown falls into.
Can you come today for a chimney cap or crown problem?
Same-day service is often possible for cap work and crown repairs, and we’ll tell you when you call whether the job fits. A full crown rebuild usually needs mortar to cure, so it takes more than a single visit. Call (833) 842-2139. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
What a Cap and Crown Estimate Looks Like
The estimate starts with an inspection. We look at the cap from the roof, check the crown for cracks and slope, and check the flashing, the flue, and the firebox for signs of water entry. Then we tell you what actually needs work and what doesn’t. Some chimneys need a cap. Some need a crown. Some need both. Our technicians have up to 13 years of experience, and the job is to give you the honest version of which one you’re facing.
We use professional-grade materials because they hold up on a roof in Colorado’s weather. DuraFlex and HeatShield cover the liner side, Famco and Copperfield cover caps, dampers, and venting, Gelco and Olympia Chimney round out the rest, and that’s why we can handle a cap and crown job and any related repair under one provider instead of sending you to a second company for the flue. Swept clean. Inspected thoroughly. Repaired to last.
Call (833) 842-2139 for a free estimate on chimney cap and crown work in Centennial. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Pricing reflects the Centennial market as of 2026. Chimney Sweep Centennial offers free estimates – call (833) 842-2139.
Written by the team at Chimney Sweep Centennial.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Neil Parker"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Sarah Meyer"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Shannon Gallagher